SLICKR 3-In-1 Ceramic Detailer
Super versatile Booster-Drying Aid-Topper & more features a Si02+polymer structure, hyper-slick finish, and fast hydrophobic results.
No. 150 Slickr Ceramic 3 in 1 quickly & easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With a SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant, or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant, or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.
Features:
- Available in 16 fl oz
- Average Spread/Coverage: 600-1,000 sq ft
TIPS: Always test the product first in a small, inconspicuous area to ensure the desired result.
As a lubricating drying aid: Following a wash while the vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfiber towel, wipe the entirety of the panel until dry. Flip towels as necessary, and change towels as they become saturated. Repeat the process on all painted surfaces (and glass).
As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move the decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface to maintain slickness/lubrication and to avoid marring. Remove the product from the panel with a dry microfiber towel. Repeat the process on all painted surfaces (and glass).
Use:
- Paint, glass, wheels, and trim
- Extremely slick finish
- Removes light dust, fingerprints, and smudges
- Up to 3 months of hydrophobic
- Easy wipe on wipe off high gloss shine
- Clay lubricant, drying aid, show car prep
- Topper over waxes, sealants, ceramic coatings, paint protection film
Not For Use On:
- Interior surfaces (Leather, Vinyl, Dash)
- Surface defects, swirls, scratches
- Heavily soiled or contaminated surfaces
Politique de commande en souffrance : Parfois, en raison de la demande ou des retards des fournisseurs, certains articles peuvent être temporairement en rupture de stock ou des articles non en stock. Pour vous assurer que vous pouvez toujours obtenir les produits dont vous avez besoin, vous pouvez commander des articles même lorsqu'ils sont en rupture de stock. Notre équipe commerciale vous informera du délai d’expédition. Une fois de nouveau en stock, nous expédions rapidement votre article, et si votre commande comprend à la fois des articles en stock et des articles en rupture de stock, nous pouvons diviser l'expédition. Vous pouvez annuler votre commande en souffrance avant l'expédition et demander un remboursement selon le mode de paiement d'origine. Pour toute demande de renseignements, contactez-nous à sales@freeportmarine.com .